spring repair and replacement

spring repair and replacement

If the spring in your garage door breaks, you’ll know it. The door will neither open nor close and,when the spring breaks, it makes a very loud noise that you can’t miss. A situation like this is not only inconvenient, but potentially dangerous as well.

A broken spring is usually the most common problem with a garage door. By far, it’s the most important component of the garage door. These springs experience constant high tension and, over time, are prone to failing. Unfortunately, the spring tends to snap at the most inconvenient time possible.

When a spring fails, it’s not a project that you should attempt to repair on your own. Due to safety concerns, only qualified technicians should attempt to adjust, install or repair a spring. At Jersey Coast Garage Door, we’re experts when it comes to spring repairs. We’ve got the training and experience to do the work right the first time, and we only use the highest quality replacement springs. When we service your garage door, you’re entitled to some of the finest labor guarantees and warranties in the business.

what is a garage door spring?

A garage door spring, also known as a torsion spring, twists to counter balance the force required to open a heavy door with ease. A broken spring will fail to tighten up on the way down, which is why the garage door will no longer lift up after a spring break. The garage door spring is coiled at its tightest when the door is down. As the garage door is prompted to lift up, the spring works in conjunction with the cables, drums and shaft to lift the weight by unraveling. The looser the spring gets, the less weight it has the ability to lift but because the garage door is split into sections and guided on secured rails, the weight that the spring holds actually decreases as the garage door gets higher.

where is the garage door spring located?

The torsion spring of a garage door is located directly above the door when it is closed, on the inside of the garage. A garage door can have multiple springs and springs can differ in size and strength. The spring used all depends on the size and weight of the garage door being lifted, as well as the projected frequency of use.

identifying a broken garage door spring

  • Garage door stopped opening or starts but then reaches a couple inches and goes back down.
  • Do you recall any loud noises you heard in your garage recently? That could have been the actual spring snapping.
  • Many times, if you look close at the spring above your head and it looks like there are two of them, that’s a sure sign that a portion of the spring broke off from the rest and you need to have your garage spring replaced.

garage spring repair can be dangerous

Remember I said that the spring is coiled at its tightest while the garage door is on the ground? This means that there is a very high amount of pressure, especially when the door is not being used. If you don’t know exactly what you’re doing and don’t have the specialized tools to fix or replace the garage spring, it could end badly. A typical spring, fully coiled to fit a residential garage door has enough force to lift at least a 150 pounds, with ease. Think of what that means for your face, arms or anything else that might be close to the spring if the wrong move were made.

garage springs should be serviced by professionals

Though they may not look like much, garage door openers are highly pressurized, mathematically calculated systems that can cause serious injuries and it is important to know the ins and outs of the specific garage door that you’re working with. If you suspect there is an issue with the spring contact our professional garage door repair and replacement professionals. Springs don’t always snap, sometimes they come off the winding cone, which is still a dangerous task to handle if you are not trained, equipped and experienced to correct such issues.

contact jersey coast garage door today for all your garage door needs!